Power Electronics SD450 Series User Manual

POWER ELECTRONICS SD450 - DEVICENET
SAFETY INSTRUCTIONS
7
ENGLISH
SAFETY INSTRUCTIONS
IMPORTANT!
 Safety instructions showed in this manual are useful to teach user
how to use the product in a correct and safety way with the purpose
of preventing possible personal injuries or property damages.
 Safety messages included here are classified as it follows:
WARNING
Be sure to take ESD (Electrostatic Discharge) protection measures
when you touch the board.
Otherwise, the optional board may get damaged due to static charges.
Implement wiring change on the optional board after checking that
the power supply is off.
Otherwise, there is a danger of connecting error and damage to the
board.
Be sure to connect correctly the optional board to the inverter.
Otherwise, there is a danger of connecting error and damage to the
board.
Be sure to install a termination resistor (120Ω, 1/4W) at the end of the
network.
Do not remove the cover while the power is applied or the unit is in
operation.
Otherwise, electric shock could occur.
Do not run the inverter with the front cover removed.
Otherwise, you may get an electric shock due to the high voltage
terminals or exposure of charged capacitors.

Power Electronics SD450 Series Specifications

General

Brand	Power Electronics
Model	SD450 Series
Category	DC Drives
Language	English