___________________________________________________________________________________________________________
Part Number 6300-095D Page 5 of 43
2 Introduction
This manual is intended for use with the PowerShield 8 battery monitoring system that uses the PowerShield Controller
data logger, PowerShield mSensor battery sensors and the PowerShield Hub. This manual describes the installation of
the system hardware.
About this manual
PowerShield 8 Installation Manual
Part Number 6300-095D
14 Nov 2018
The information contained in this manual is copyright and is not to be reproduced without the written authority of
PowerShield Ltd.
PowerShield Limited
PO Box 102-190
NSMC
North Shore City 0745
New Zealand
PowerShield is committed to being responsible to take care of our environment. PowerShield products and packaging
contain materials that are highly recoverable and recyclable. Please consider recycling through proper channels at your
local packaging recycler and e-waste recycler.
To Next Page
Loading...
