7. Carefully lift the deck and belt out of the treadmill frame.
8. Remove the running belt from the deck.
9. Check the condition of the belt and deck surfaces:
a. If the belt is worn, discard and replace with a new belt.
b. If the belt is replaced with a new belt, the top deck surface must also be new:
Check the condition of the deck bottom surface:
i. If the bottom deck surface is in new condition, flip and reuse the deck
(new side on top).
ii. If the bottom deck surface is not in new condition, discard the deck and
replace with a new deck.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 152
6 Replacement Procedures
Running Belt and Deck Replacement Procedure
To Next Page
Loading...
Need help?
General