6. Remove the left and right #3 Phillips front deck fasteners. These fasteners are
attached to the front GFX
1
Cushion Tinnerman clips. Retain part(s) and/or fastener(s)
for installation.
Note: Some early release TRM600s did not include the left and right front
deck fasteners. If the front fasteners are missing, purchase fastener hard-
ware and use to secure the front of the deck when reinstalled. Purchase two
front GFX cushion Tinnerman clips (2x) and fasteners (2x).
1
Ground Effects Impact Control System: Patented treadmill design that out performs a nat-
ural running surface, absorbs high-impact movement, reduces joint stress and minimizes
fatigue and supports a solid and controlled push off.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 151
6 Replacement Procedures
Running Belt and Deck Replacement Procedure
To Next Page
Loading...
Need help?
General