Prinoth BISON - Danger Zones

Type of danger involved in operating the snow groomer Danger Zones Danger during
A B C
Installation
Adjusting
Use
Cleaning
Troubleshooting
Servicing
Disposal
■ Risk of touching electrical conductors
Connecting cable for halogen headlamps X X X X
Connectors for engine preheating X X X
■ Risk of touching electrical conductors indirectly
When using third party batteries with connecting cables for
jump starting
X X
■ Risks due to heat radiation and being splashed with molten materials
When using third party batteries with connecting cables for
jump starting
X X
-
Dangers caused by noise
-
■ Risk of permanent damage to health
Due to noise from engine and attachments X X X
-
Dangers caused by vibration
-
■ Risk of permanent damage to health
Vibrations at driver seat X X
-
Risks due to heat
-
■ Risk of burn and scalding
When touching the engine block X X X X X X
When touching the engine exhaust pipe X X X X X X
When touching hot surfaces on the turbocharger X X X X X X
When touching the radiator X X X X X X
When touching the engine oil cooler X X X X X X
When touching the hydraulic fluid cooler X X X X X X
When touching the cooling system pipes X X X X X X
When touching the lubricant system pipes X X X X X X
When touching the hydraulic hoses and hydraulic units X X X X X X X X
When touching the halogen lamps X X X X
-
Dangers caused by harmful substances
-
■ Caustic burns and poisoning
Exhaust fumes entering the driver's cabin X X X X
Exhaust fumes from the engine X X X X X X X
Operating and Maintenance Manual
Snow groomer BISON
30 (255)
3 - Safety
BISON 908930245 - 30367