Why does my Prodigy Autocode show an error due to temperature?
If your Prodigy Blood Glucose Meter displays an error because the environmental temperature is outside the system's operation range (50°F ~ 104°F or 10°C ~ 40°C), repeat the test after the meter and test strip are within the correct temperature range.
Specifies who the Prodigy AutoCode® system is designed for and its applications.
Instructions for properly installing the meter's power source.
Step-by-step instructions for conducting a control solution test.
Instructions on how to set up the lancing device for sample collection.
Detailed steps on how to obtain a blood sample from the fingertip or alternate sites.
Specific instructions on correctly applying blood to the test strip for accurate readings.
Process for retrieving specific past test results from memory.
Step-by-step guide for replacing the meter's batteries.
Explains specific messages displayed by the meter to indicate problems.
How to identify and manage low blood glucose (hypoglycemia) readings.
How to identify and manage high blood glucose (hyperglycemia) readings.
General| Measurement Range | 20-600 mg/dL |
|---|---|
| Sample Size | 0.6 µL |
| Test Time | 6 seconds |
| Coding | No Coding Required |
| Battery Type | 2 x AAA batteries |
| Automatic Shutoff | 2 minutes |
| Data Port | USB |
| Operating Conditions | 50-104°F (10-40°C) |
| Memory Capacity | Up to 450 test results |
To Next Page
