Beta Draft Confidential
Network Page
Internet Managed Thermostat Configuration Guide, Release 1.0 2-41
Part No. 600-03001-550, Rev. 1
Remote Server Configuration
Remote Access Controls whether the Remote Server service is enabled. Remote
access is the term used to describe the management and control
of the thermostat from networks outside the local subnet on
which the thermostat resides. Remote access provides the
thermostat with the ability to be controlled from across the
Internet (with the Proliphix UEM).
Disabled (default) – Remote Server function is disabled.
Enabled – The thermostat is enabled to participate with the
Proliphix UEM server.
Server Address Displays the IP address or DNS name of the remote server.
Interval Specifies the frequency of thermostat “calling home” to the
Proliphix server.
Last Attempt Clicking Call Home forces the intercommunication between the
thermostat and the remote server.
mm.dd.yyyy – Date of last attempt to access the remote
server.
hh.mm.ss – Time since last attempt to access the remote
server.
Callhome Attempt State Displays the status (Success or Fail) of last attempt to initiate the
communication to the remote server.
Push Server State
Last Success Displays the date and time of last successful communication
with the remote server.
Last Change Upload Displays the date and time the last change was made to the
thermostat configuration.
Last Observation Upload
Table 2-12 Network - Remote Access Field Descriptions (Continued)
Field Description
To Next Page
Loading...
