ProMinent DULCOMETER D1Cc - Activation Code for Extended Functions; Extended Functions Obtainable with the Activation Code

5.2 Activation Code for Extended Functions
Activation code
Access to further functions can optionally be provided by means of an activation
code.
Should you require additional operating literature for these functions, this can be
obtained on the homepage of ProMinent Dosiertechnik, Heidelberg.
general setting
informationen
Identcode:
Vxxxxxxxxxx
D1CB xxxxxxxxx
Srnr: xxxxxxxxxx
add. functions
software version
measure change
wach timer
function
unlocking
yes
no
Code input:
_ _ _ _ - _ _ _ _ -
_ _ _ _ - _ _ _ _
A0010_GB
Code ok!
wrong code!
Fig. 25: Activation code / Serial number
The activation code is entered one digit at a time using the
and keys. Move to the
next position using the
key.
The newly activated functions must be configured or parameterised in the relevant
menu or new measured variables must be calibrated. Information on this can be
found in the relevant complete operating menu.
5.2.1 Extended Functions Obtain‐
able with the Activation Code
Extended functions
The DULCOMETER
®
D1Cb / D1Cc con‐
troller functionality can be extended or
modified by means of a 16-digit activation
code. Functions can be enabled several
times.
D1Cb / D1Cc software upgrade
To provide an activation code, ProMi‐
nent requires the 10-digit serial
number (Srnr) and the required soft‐
ware upgrade identity code, which
can both be found in the table below.
Commissioning
55