ProMinent DULCOMETER D1Cc - Set Ma Output

10.5 Set mA output
control with mA-Output
mA-Output
measured value
mA-Output
setting ?
only with mA-Output
mA-Output
measured value
0…20 mA
control
control value:
positive ↑
negative ↓
1.00 ppm
0.00 ppm
0 mA =
20 mA =
mA-Output
control value
0%
0 mA=
20 mA =
-100%
mA-Output
correcting value
100.0
°C
0.0 °C
0 mA
=
20 mA =
A0031
error current
4…20 mA/21.5 mA
Fig. 70: mA-Output
Set values of the mA-Output
Possible values
Factory set‐
ting
Increment Lower value Upper value Remarks
Assign‐
ment of
variable
Off Measured
value
Control
value
Possible if
control avail‐
able
Correcting
value
Only available
with correc‐
tion variable
Off
Range 0 – 20 mA 0-20 mA
4-20 mA
3.6/4-20 mA Reduction to
3.6 mA if
alarm relay is
switched
Operating Menus Independent of Measured Variables
129