Proroute GEM420 4G M2M Router
GEM420 User Manual 142
1. VRRP: Enable or disable the VRRP function.
2. Virtual Server ID: Means Group ID. Specify the ID number of the virtual server. Its
value ranges from 1 to 255.
3. Priority of Virtual Server: Specify the priority to use in VRRP negotiations. Valid
values are from 1 to 254, and a larger value has higher priority.
4. Virtual Server IP Address: Specify the IP address of the virtual server.
Click on “Save” to store what you just select or “Undo” to give up.
3.2.5 System Management
This device supports many system management protocols, such as TR-069, SNMP,
Telnet with CLI and UPnP. You can finish those configurations in this sub-section.
3.2.5.1 TR-069
TR-069 (Technical Report 069) is a Broadband Forum technical specification entitled
CPE WAN Management Protocol (CWMP). It defines an application layer protocol for
remote management of end-user devices, like this gateway device. As a bidirectional
SOAP/HTTP-based protocol, it provides the communication between
customer-premises equipment (CPE) and Auto Configuration Servers (ACS). The
Security Gateway is such CPE.
To Next Page
Loading...