Proroute GEM420 4G M2M Router
GEM420 User Manual 77
10. RF Bandwidth: Select Auto, HT20 or HT40 to define the RF bandwidth for a
channel. By default, it is Auto for the device.
11. Transmit Power: Normally the wireless transmission power operates at 100% out
power specification of this device. You can lower down the power ratio to prevent
transmissions from reaching beyond your corporate/home office or designated
wireless area.
3.1.4 IPv6 Setup
The growth of the Internet has created a need for more addresses than are possible
with IPv4. IPv6 (Internet Protocol version 6) is a version of the Internet Protocol (IP)
intended to succeed IPv4, which is the protocol currently used to direct almost all
Internet traffic. IPv6 also implements additional features not present in IPv4. It
To Next Page
Loading...