Proroute GEM420 4G M2M Router
GEM420 User Manual 43
1. WAN Type: Choose “PPPoE” from the drop list.
2. IPv6 Dual Stack: You can enable this option if your ISP provides not only
one IPv4 but also one IPv6 address.
3. PPPoE Account and Password: The account and password your ISP
assigned to you. Please note the account and password is case sensitive.
For security concern, the password you input won’t be displayed on web UI.
4. Primary DNS/ Secondary DNS: In most cases, ISP will assign DNS server
automatically after PPPoE connection is established. Input the IP address of
primary and secondary DNS server manually if required.
5. Connection Control: Select your connection control scheme from the drop
list: “Auto-reconnect (Always-on)”, “Dial-on-demand” or “Manually”. If
selecting “Auto-reconnect (Always-on)”, this gateway will start to establish
Internet connection automatically since it’s powered on. It’s recommended
to choose this scheme if for mission critical applications to ensure Internet
To Next Page
Loading...