Need help?Do you have a question about the Pulse Secure MAG2600 and is the answer not in the manual?
General| Device Type | Gateway |
|---|---|
| Throughput | 1 Gbps |
| IPSec VPN Throughput | Up to 200 Mbps |
| Humidity | 10% to 90% non-condensing |
| VPN Protocols Supported | IPSec, SSL |
| Form Factor | 1U Rackmount |
| Network Interfaces | 4 x 10/100/1000Base-T |
| Power Supply | AC |
| Concurrent Users | 100 |
| Interfaces | 4 x 10/100/1000Base-T |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4 to 158°F (-20 to 70°C) |
Details on accessing documentation and requesting technical support.
Information on how to provide feedback for documentation improvements.
Overview of the MAG Series hardware and available models.
Detailed hardware features and functions for each gateway model.
Operating and storage environmental specifications for the gateways.
Describes the different interfaces for accessing and managing the gateway.
Details of the front and back panel components for the MAG2600.
Details of the front and back panel components for the MAG4610.
Details of the front and back panel components for the MAG6610.
Details of the front and back panel components for the MAG6611.
Identifies components that can be replaced by the user.
Descriptions of AC power supplies and the cooling system.
Details on integrated access service modules and the chassis management card.
Explanation of status LEDs on gateway components.
Checklists and guidelines for preparing the installation site.
Requirements for electrical, power, and rack mounting.
Specifications for cabinet size, clearance, and airflow.
Details on AC power cord specifications and compliance.
Summary of the steps for installing the Pulse Secure Gateway.
Procedures for installing faceplates and various service module kits.
Instructions for installing power supplies, fan assemblies, and hard drives.
Steps for installing integrated access service modules and the CMC.
Guidance on mounting gateways in four-post racks or cabinets.
Instructions for using specific mounting kits like RK1U, RK2U, and others.
Procedures for installing the MAG2600 on a desk or in a tray.
Steps for grounding the gateway and connecting AC power.
Instructions for connecting to a management console and the network.
Procedure for powering on the AC-powered Pulse Secure Gateway.
Instructions for powering off the gateway and using the reset button.
Steps to configure service module personality via serial console or web console.
Procedures for removing and replacing power supplies and fan trays.
Steps for removing hard drives and integrated access service modules.
Guidance on routine maintenance and monitoring component status via LEDs.
Information on contacting technical support and understanding audible alerts.
Process for returning components for repair or replacement and locating serial numbers.
Guidelines for packing the gateway and its components for shipping.
General electrical safety guidelines and accident procedures.
Specific safety and wiring guidelines for DC-powered gateways.
Information on signaling distance, RFI, EMC, and console cable specs.
Regulatory compliance statements for Japan, Israel, Saudi Arabia, South Korea, and Taiwan.
To Next Page
