Pulse Secure MAG2600 - Electrical, Power, and Rack Requirements

MAG Series Pulse Secure Gateways Hardware Guide
© 2016 Pulse Secure, LLC., All rights reserved.
26
Electrical and Power Requirements
There are factors you must consider while planning the electrical wiring and power availability at your site.
These factors include the following:
• Power specifications and requirements for the device
• Electrical wiring guidelines for the device installation site
• Power, connection, and power cord specifications for the device • Grounding guidelines and specifications
for the device
The power requirements vary greatly depending upon your configuration. Use the following AC power
specifications as a general rule.
Table: Power Specifications for an AC Power Supply
Item
MAG2600
MAG4610
MAG6610
MAG6611
Voltage range
100 through 240
100 through 240
100 through 240
100 through 240
AC input line
frequency
50 through 60 Hz
50 through 60 Hz
50 through 60 Hz
50 through 60 Hz
AC input current
rating
1A
1A
8A
10A
AC output power
30-W
70-W
560-W
750-W
Rack Requirements
The Pulse Secure Gateway can be installed in a rack. Many types of racks are acceptable, including front-
mount racks and four-post (telco) racks.
Rack requirements pertain to:
• Rack size
• Mounting bracket hole spacing
• Rack connection to the building structure
The next table provides the rack size, clearance, and airflow requirements.