Environmental Parameters
Operating temperature: 41° through 104° F (5° through 40° C)
Storage temperature: -40° through 158° F (-40° through 70° C)
Relative humidity (operating): 8% - 90% (non condensing)
Relative humidity (storage): 5% - 95% (non condensing)
Altitude (operating): 10,000 ft (maximum)
Altitude (storage): 40,000 ft (maximum)
Safety certificates: EN 60950-1: 2006 (2nd Edition); CAN/CSA-C22.2 No. 60950-1 (2007); UL 60950-1 (2nd Ed.)
Emissions certificates:
• EN 55022 (CISPR 22): 2006 +A1:2007; (ACMA) AS/NZS CISPR 22: 2006; FCC Part 15
•
Subpart B; Industry Canada ICES-003 Issue 4, February 2004; and VCCI V-3/2009.04 and V-4/2009.04 ETSI
EN 300 386 V1.4.1 (2008-04) for a Class A Device (MAG2600 only: VCCI V-3/2009.04 and V-4/2009.04 ETSi
EN 300 386 V1.4.1 (2008-04) for a Class B Device)
Accessing the Pulse Secure Gateway
User interfaces are available for monitoring, configuring, troubleshooting, and managing the Pulse Secure
Gateway:
•
Web interface—Web-based graphical interface that allows you to operate a Pulse Secure Gateway without
commands. Available only if the optional chassis management card (CMC) is installed on the MAG6610
and MAG6611.
•
Pulse Secure command-line interface (CLI)—Pulse Secure command shell that runs on top of a UNIX-
based operating system kernel. The CLI is a straightforward command interface. On a single line, you
type commands that are executed when you press the Enter key. The CLI provides command Help and
command completion. Available only if the optional CMC is installed on the MAG6610 and MAG6611.
•
Integrated Access Service Module interface—Web-based graphic interface that allows you to operate the
Integrated Access Service Module without commands. This interface provides access to all module-related
functions and features. This is the same web-based interface used with the SA Series SSL VPN appliances,
the Unified Access Control appliances or the WX Series appliances.
To Next Page
Loading...