Using the MAG-RK1U2 Mounting Kit
The MAG-RK1U2 mounting kit contains the hardware for rack-mounting two MAG4610 1U Pulse Secure
Gateways side by side in a rack or cabinet:
The MAG-RK1U2 mounting kit includes:
•
One mounting tray
•
Ten flat-head 8-32 screws
To attach your MAG4610 devices to the MAG-RK1U2 mounting kit:
1.
Remove all contents from the packaging.
2.
Place two MAG4610 devices upside down and side by side on a flat stable surface.
3.
Turn the mounting tray upside down and place it over the two MAG4610 devices. Align the mounting
ears with the front side of the devices.
4.
Secure the MAG4610 devices to the bottom mounting tray using four 8-32 flat-head screws.
To Next Page
Loading...