4.
Enter the number corresponding to the personality for which you want to configure the service module.
For example, if your screen looks like this:
Please select a factory-reset personality:
[1] Pulse Secure Access Service 7.1 R1
[2] Pulse Access Control Service 4.1 R1
Press 1 to install the Pulse Secure Access Service package. Press 2 to install the Pulse Access Control
Service package.
5.
Follow the prompts to complete your configuration.
To change the personality from the service module administrator Web console:
1.
In the admin console, choose Maintenance > System > Change Personality.
2.
Click Browse to select the service package to install.
3.
Click Change Now.
NOTE: The MAG-SM360-PROFILER service module has similar hardware but is different from a MAG-SM360
service module. It is not an integrated service module. The MAG-SM360-PROFILER can be installed into a
MAG6610 or MAG6611 chassis. It has Great Bay Software Beacon Endpoint Profiler software preinstalled.
You cannot boot a different software image to change the personality of the MAG-SM360-PROFILER service
module.
To Next Page
Loading...