Quectel EC25

LTE Module Series
EC25&EC21 AT Commands Manual
EC25&EC21_AT_Commands_Manual 110 / 231
8 Phonebook Commands
8.1. AT+CNUM Subscriber Number
The command can get the subscribers own number(s) from the (U)SIM.
Parameter
AT+CNUM Subscriber Number
Test Command
AT+CNUM=?
Response
OK
Execution Command
AT+CNUM
Response
[+CNUM: [<alpha>],<number>,<type>]
[+CNUM: [<alpha>],<number>,<type>]
OK
ERROR
If there is any error related to ME functionality:
+CME ERROR: <err>
Maximum Response Time
300ms
Reference
3GPP 27.007
<alpha> Optional alphanumeric string associated with <number>. The used character set
should be the one selected with AT+CSCS command
<number> String type phone number of format specified by <type>
<type> Type of address of octet in integer format (Refer to 3GPP TS 24.008 subclause
10.5.4.7 for details ). Usually, it has three kinds of values:
129 Unknown type
145 International type (contains the character “+”)
161 National type