Quectel EC25

LTE Module Series
EC25&EC21 AT Commands Manual
EC25&EC21_AT_Commands_Manual 47 / 231
Parameter
4.3.9. AT+QCFG="rrc" RRC Release Version Configuration
The command specifies the RRC release version. This configuration is valid only after the module is
restarted.
Parameter
OK
If <cat> is not omitted, configure the HSUPA category:
OK
ERROR
If there is any error related to ME functionality:
+CME ERROR: <err>
Maximum Response Time
300ms
<cat> HSUPA category
5 Category 5
6 Category 6
AT+QCFG="rrc" RRC Release Version Configuration
Write Command
AT+QCFG=“rrc”[,<rrcr>]
Response
If <rrcr> is omitted, return the current configuration:
+QCFG: “rrc”,<rrcr>
OK
If <rrcr> is not omitted, configure the RRC release version:
OK
ERROR
If there is any error related to ME functionality:
+CME ERROR: <err>
Maximum Response Time
300ms
<rrcr> RRC release version.
0 R99