Quectel EC25

LTE Module Series
EC25&EC21 AT Commands Manual
EC25&EC21_AT_Commands_Manual 97 / 231
Parameter
7.11. ATS8 Set the Time to Wait for Comma Dial Modifier
The command is implemented for compatibility reasons only, and has no effect.
Parameter
Write Command
ATS7=<n>
Response
This parameter setting determines the amount of time (unit:
second) to wait for the connection completion in case of
answering or originating a call.
OK
Maximum Response Time
300ms
Reference
V.25ter
<n> 0 Disabled
1-255 Number of seconds to wait for connection completion. Unit: second.
ATS8 Set the Time to Wait for Comma Dial Modifier
Read Command
ATS8?
Response
<n>
OK
Write Command
ATS8=<n>
Response
OK
Maximum Response Time
300ms
Reference
V.25ter
<n> 0 No pause when comma encountered in dial string
1-2-255 Number of seconds to wait for comma dial modifier