Quectel EC25

LTE Module Series
EC25&EC21 AT Commands Manual
EC25&EC21_AT_Commands_Manual 196 / 231
Parameter
These parameters will not be saved.
Example
AT+QEEC=? //Query the range.
+QEEC: (0-49), (0-65535)
OK
AT+QEEC=6,1234 //Set the value of index 6 to 1234.
OK
12.9. AT+QSIDET Set the Side Tone Gain in Current Mode
The command is used to set the side tone gain value in current mode. It will take effect at next sound
activity.
<index> Numeric type. Indicates the parameter‟s index.
Range: 0-49
<value> Numeric type. Indicates the parameter‟s value.
Range: 0-65535
AT+QSIDET Set the Side Tone Gain in Current Mode
Test Command
AT+QSIDET=?
Response
+QSIDET: (list of supported <st_gain>s)
OK
Read Command
AT+QSIDET?
Response
+QSIDET: <st_gain>
OK
Write Command
AT+QSIDET=<st_gain>
Response
OK
ERROR
Maximum Response Time
300ms
NOTE