LTE Module Series
EC25&EC21 AT Commands Manual
EC25&EC21_AT_Commands_Manual 96 / 231
RING //A call is coming
RING
RING //Automatically answering the call after three rings
7.9. ATS6 Set Pause before Blind Dialing
The command is implemented for compatibility reasons only, and has no effect.
Parameter
7.10. ATS7 Set Time to Wait for Connection Completion
The command specifies the amount of time (unit: second) to wait for the connection completion in case of
answering or originating a call. If no connection is established during the time, the module disconnects
from the line.
ATS6 Set Pause before Blind Dialing
<n> 0-2-10 Number of seconds to wait before blind dialing
ATS7 Set Time to Wait for Connection Completion
To Next Page
Loading...
