Quectel EC25

LTE Module Series
EC25&EC21 AT Commands Manual
EC25&EC21_AT_Commands_Manual 57 / 231
Parameter
The settings of the command will take effect immediately, and will be saved after power off.
Example
AT+QCFG="tone/incoming"
+QCFG: "tone/incoming",0 //Ring tone function is disabled
OK
AT+QCFG="tone/incoming",1 //Enable ring tone
OK
AT+QCFG="tone/incoming"
+QCFG: "tone/incoming",1
OK
4.4. AT+QINDCFG URC Indication Configuration
The command is used to control URC indication.
If there is any error related to ME functionality:
+CME ERROR: <err>
Reference
<enable> 0 Disable ring tone
1 Enable Nokia ring tone
2 Enable ring tone
AT+QINDCFG URC Indication Configuration
Test command
AT+QINDCFG=?
Response
+QINDCFG: "all",(0,1),(0,1)
+QINDCFG: "csq",(0,1),(0,1)
+QINDCFG: "smsfull",(0,1),(0,1)
+QINDCFG: "ring",(0,1),(0,1)
+QINDCFG: "smsincoming",(0,1),(0,1)
+QINDCFG: "act",(0,1),(0,1)
NOTE