LTE Module Series
EC25&EC21 AT Commands Manual
EC25&EC21_AT_Commands_Manual 112 / 231
8.3. AT+CPBR Read Phonebook Entries
The command can return phonebook entries in location number range <index1>... <index2> from the
current phonebook memory storage selected with AT+CPBS. If <index2> is left out, only location
<index1> is returned.
Parameter
AT+CPBR Read Phonebook Entries
Response
+CPBR: (list of supported <index>s),<nlength>,<tlength>
OK
Write Command
AT+CPBR=<index1>[,<index2>]
Response
+CPBR: <index1>,<number>,<type>,<text>
[+CPBR: <index2>,<number>,<type>,<text>
[…]]
OK
ERROR
If there is any error related to ME functionality:
+CME ERROR: <err>
Depends on the storage of phonebook entries.
<index> Integer type value in the range of location numbers of phone book memory.
<nlength> Integer type. Indicates the maximum length of field <number>
<tlength> Integer type. Indicates the maximum length of field <text>
<index1> The first phone book record to read
<index2> The last phonebook record to read
<type> Type of address of octet in integer format (refer to 3GPP TS 24.008 subclause
10.5.4.7 for details ). Usually, it has three kinds of values:
129 Unknown type
145 International type(contains the character “+”)
161 National type
<text> String type field of maximum length <tlength> in current TE character set specified by
AT+CSCS.
To Next Page
Loading...
Need help?
General
