Quectel EC25

LTE Module Series
EC25&EC21 AT Commands Manual
EC25&EC21_AT_Commands_Manual 55 / 231
Parameter
4.3.18. AT+QCFG="urc/cache" URC Cache Function
Parameter
The settings of the command will take effect immediately and will not be saved after power off.
+CME ERROR: <err>
Maximum Response Time
300ms
<enable> 0 URC indication will be outputted when ring indicator pulse starts.
1 URC indication will be outputted when ring indicator pulse ends (only
effective when the type of ring indicator is “pulse”. Please refer to
AT+QCFG="urc/ri/ring", AT+QCFG="urc/ri/smsincoming" and
AT+QCFG="urc/ri/other" for more details).
AT+QCFG="urc/cache" URC Cache Function
Write Command
AT+QCFG="urc/cache",<enable>
Response
If <enable> is omitted, return the current configuration:
+QCFG: "urc/cache",<enable>
OK
If <enable> is not omitted, enable/disable URC cache
function:
OK
ERROR
If there is any error related to ME functionality:
+CME ERROR: <err>
Maximum Response Time
300ms
<enable> 0 Disable URC cache
1 Enable URC cache
NOTE