string format. BCD numbers (or GSM default alphabet characters) are converted to
characters of the currently selected TE character set (refer to AT+CSCS command).
The type of address is given by <tora>.
<tora> Type of recipient address. 3GPP TS 24.011 TP-Recipient-Address Type-of-Address
octet in integer format (default refer <toda>).
<toda> Type of recipient address. 3GPP TS 24.011 TP-Recipient-Address Type-of-Address
octet in integer format.
<tooa> Type of originating address.3GPP TS 24.011 TP-Originating-Address Type-of-Address
octet in integer format (default refer to <toda>).
<sca> Service center address. 3GPP TS 24.011 RP SC address Address-Value field in string
format. BCD numbers (or GSM 7 bit default alphabet characters) are converted to
characters of the currently selected TE character set (refer to AT+CSCS command in
3GPP TS 27.007). The type of address is given by <tosca>.
<tosca> Type of service center address. 3GPP TS 24.011 RP SC address Type-of-Address octet
in integer format (default refer to <toda>).
<length> Message length. Integer type. Indicating in the text mode (AT+CMGF=1) the length of
the message body <data> (or <cdata>) in characters, or in PDU mode (AT+CMGF=0)
the length of the actual TP data unit in octets (i.e. the RP layer SMSC address octets
are not counted in the length).
<data> The text of short message. Please refer Chapter 14.8 for details.
<pdu> In the case of SMS: 3GPP TS 24.011 SC address followed by 3GPP TS 23.040 TPDU
in hexadecimal format: ME/TA converts each octet of TP data unit into two IRA
character long hexadecimal number (e.g. octet with integer value 42 is presented to TE
as two characters 2A (IRA 50 and 65)).
<prt> Priority
0 Normal
1 Interactive
2 Urgent
3 Emergency
<fmt> Format
0 GSM 7 bit
1 ASCII
6 UNICODE
<prv> Privacy
0 Normal
1 Restricted
2 Confidential
3 Secret
<lang> Language
0 Unspecified
1 English
2 French
3 Spanish
4 Japanese
To Next Page
Loading...
Need help?
General
