LTE Module Series
EC25&EC21 AT Commands Manual
EC25&EC21_AT_Commands_Manual 217 / 231
Extended time zone reporting
New message is received, and saved
to memory
+CMT:
[<alpha>],<length><CR><LF>
<pdu>
New short message is received and
output directly to TE (PDU mode)
+CMT:
<oa>,[<alpha>],<scts>[,<tooa>
,<fo>,<pid>,<dcs>,<sca>,<tosc
a>,<length>]<CR><LF><data>
New short message is received and
output directly to TE (Text mode)
^HCMT:
<oa>,<scts>,<lang>,
<fmt>,<length>,<prt>,<prv>,<ty
pe>,<stat><CR><LF><data>
New short message is received and
output directly to TE
+CBM:
<length><CR><LF><pdu>
New CBM is received and output
directly (PDU mode)
+CBM:
<sn>,<mid>,<dcs>,<page>,<p
ages><CR><LF><data>
New CBM is received and output
directly to TE (Text mode)
+CDS:
<length><CR><LF><pdu>
New CDS is received and output
directly (PDU mode)
+CDS:
<fo>,<mr>,[<ra>],[<tora>],<sct
s>,<dt>,<st>
New CDS is received and output
directly to TE (Text mode)
New message status report is
received, and saved to memory
^HCDS:
<oa>,<scts>,<lang>,
<fmt>,<length>,<prt>,<prv>,<ty
pe>,<stat><CR><LF><data>
New CDS is received and output
directly to TE
+COLP:
<number>,<type>,[<subaddr>],
[<satype>],[<alpha>]
The presentation of the COL
(connected line) at the TE for a
mobile originated call
+CLIP:
<number>,<type>,[subaddr],[s
atype],[<alpha>],<CLI validity>
Mobile terminating call indication
An incoming call is indicated to the
TE with unsolicited result code
instead of the normal RING
To Next Page
Loading...
Need help?
General
