<bandval> A hexadecimal value that specifies the GSM and WCDMA frequency band. If it
is set to 0, it means not to change GSM and WCDMA frequency band. (e.g.:
00000013=00000001(GSM900)+00000002(GSM1800)+00000010(WCDMA
2100))
00000000 No change
00000001 GSM900
00000002 GSM1800
00000004 GSM850
00000008 GSM1900
00000010 WCDMA 2100
00000020 WCDMA 1900
00000040 WCDMA 850
00000080 WCDMA 900
00000100 WCDMA 800
00000200 WCDMA 1700
0000FFFF Any frequency band
<ltebandval> A hexadecimal value that specifies the LTE frequency band. If it is set to 0 or
0x40000000, it means not to change LTE frequency band. (e.g.: 0x15=0x1(LTE
B1)+0x4(LTE B3)+0x10(LTE B5))
0x1 (CM_BAND_PREF_LTE_EUTRAN_BAND1) LTE B1
0x4 (CM_BAND_PREF_LTE_EUTRAN_BAND3) LTE B3
0x10 (CM_BAND_PREF_LTE_EUTRAN_BAND5) LTE B5
0x40 (CM_BAND_PREF_LTE_EUTRAN_BAND7) LTE B7
0x80 (CM_BAND_PREF_LTE_EUTRAN_BAND8) LTE B8
0x80000(CM_BAND_PREF_LTE_EUTRAN_BAND20) LTE B20
0x7FFFFFFFFFFFFFFF(CM_BAND_PREF_ANY) Any frequency band
<tdsbandval> A hexadecimal value that specifies the TD-SCDMA frequency band. If it is set to
0 or 0x40000000, it means not to change TD-SCDMA frequency band. (e.g.:
0x21=0x1(TDS BCA)+0x20(TDS BCF))
0x1 (CM_BAND_PREF_TDS_BANDA) TDS BCA
0x2 (CM_BAND_PREF_TDS_BANDB) TDS BCB
0x4 (CM_BAND_PREF_TDS_BANDC) TDS BCC
0x8 (CM_BAND_PREF_TDS_BANDD) TDS BCD
0x10 (CM_BAND_PREF_TDS_BANDE) TDS BCE
0x20 (CM_BAND_PREF_TDS_BANDF) TDS BCF
<effect> When to take effect
0 Take effect after UE reboots
To Next Page
Loading...
