Quectel EC25

LTE Module Series
EC25&EC21 AT Commands Manual
EC25&EC21_AT_Commands_Manual 72 / 231
Parameter
Example
AT+QSIMSTAT? //Query (U)SIM card insertion status
+QSIMSTAT: 0,1
OK
AT+QSIMDET=1,0
OK
AT+QSIMSTAT=1 //Enable (U)SIM card insertion status report
OK
AT+QSIMSTAT?
+QSIMSTAT: 1,1
OK
<Remove (U)SIM card>
+QSIMSTAT : 1,0 //Report of (U)SIM card insertion status, removed
+CPIN: NOT READY
AT+QSIMSTAT?
+QSIMSTAT: 1,0
Read Command
AT+QSIMSTAT?
Response
+QSIMSTAT: <enable>,<inserted_status>
OK
Write Command
AT+QSIMSTAT=<enable>
Response
OK
ERROR
Maximum Response Time
300ms
<enable> Enable or disable (U)SIM card insertion status report. If it is enabled, when (U)SIM
card is removed or inserted, the URC +QSIMSTAT: <enable>,<insertedstatus>
will be reported.
0 Disable
1 Enable
<insertedstatus> (U)SIM card is inserted or removed. This argument is not allowed to be set.
0 Removed
1 Inserted
2 Unknown, before (U)SIM initialization