Troubleshooting
Kiaro! 50 User Guide 105
Debris on Printhead
Description
A thicker vertical line appears through the printed output in the print direction as a
complete absence of color.
Cause
Multiple contiguous nozzles in the printhead are clogged by debris.
Possible Solutions
Running a heavy printhead cleaning routine from the maintenance utility will attempt to
resolve the clog. See “Cleaning Printheads” on page 61.
Running a printhead priming routine from the maintenance utility will drain and refill the
printheads with ink. See “Priming the Printheads” on page 63.
If the problem persists, please contact Technical Support.
To Next Page
Loading...
