To Next PageTo Next PageHow to address ink contamination between printheads in QuickLabel Label Maker?
To resolve the issue of ink from one printhead contaminating another in your QuickLabel Label Maker, perform a printhead priming and then immediately one or more heavy cleanings via the maintenance utility to flush the ink out.
How to fix streaks on printout with QuickLabel Kiaro! 200?
If your QuickLabel Label Maker is experiencing streaks on the printout, open the Cleaning tab of the Maintenance Utility and perform cleaning. If the problem persists after performing cleaning, contact QuickLabel Support.
What to do if media moves faster or slower than intended during printing with QuickLabel Kiaro! 200?
To address the issue of media moving faster or slower than intended during printing with your QuickLabel Label Maker, ensure the rewinder is aligned with the exiting media if one is in use. Make sure the label exit is uninhibited and lower the rewinder torque.
How to fix white spots due to missing colors in QuickLabel Label Maker?
To resolve white spots due to missing colors on your QuickLabel Label Maker, open the Cleaning tab of the Maintenance Utility and perform cleaning. If the problem persists after performing cleaning, contact QuickLabel Support.
What to do if upper unit, ink tank door, or maintenance cartridge door is open on QuickLabel Kiaro! 200 Label Maker?
Close the upper unit, ink tank door, or maintenance cartridge door of your QuickLabel Label Maker and ensure it is closed tightly.
What to do if power supply is not providing power to QuickLabel Kiaro! 200 Label Maker?
Connect another device to the power supply to confirm that the outlet is providing power. If you cannot restore the printer to normal operation, contact QuickLabel Support.
How to increase print speed of QuickLabel Label Maker?
If your QuickLabel Label Maker's print speed is set to a lower speed, set the print speed in the Layout tab of the printer driver or in Custom QuickLabel Omni. Auto print speed is recommended.
What to do if interface cable is disconnected from QuickLabel Kiaro! 200?
Check the interface cable of your QuickLabel Label Maker and make sure that it is connected to the printer and the computer.
How to fix inherent flaws visible after printing solid colors on QuickLabel Kiaro! 200?
To address inherent flaws becoming visible after printing solid color fills with your QuickLabel Label Maker, try using a rewinder with a dancer-arm. This helps ensure the media is as flat and moves as smoothly as possible.
How to prevent contaminants on labels affecting ink absorption with QuickLabel Label Maker?
To resolve the issue of contaminants affecting ink absorption on your QuickLabel Label Maker, handle the media with care.
General| Print Technology | Inkjet |
|---|---|
| Connectivity | USB, Ethernet |
| Cutter | Automatic |
| Max Print Speed | 152 mm/s |
| Resolution | 1200 dpi |
| Media Types | Tags |
| Operating System Compatibility | Windows, Mac |
| Supported Label Materials | Paper, polyester, polypropylene |
| Weight | 10 kg |
Specifies environmental factors and requirements for printer placement.
Lists critical steps to follow during printer installation to prevent damage.
Outlines the necessary hardware and software for the printer.
Step-by-step guide for safely removing the printer from packaging.
Instructions for installing the ink cartridges into the printer.
Procedure to fill the printer's ink system for the first time.
Guide on how to correctly load label rolls into the printer.
Steps to install the printer software via a USB connection.
Steps to install the printer software via a network connection.
Overview of the Kiaro! 200's features and benefits.
Identifies and describes the main components of the printer.
Explains the controls and indicators on the printer's operation panel.
Instructions for powering the printer on and safely turning it off.
Guide to selecting appropriate software for label creation.
Configuration of printer driver settings for label printing.
Adjusting visual settings like print quality and color for labels.
Process for sending label jobs to the printer and monitoring them.
Instructions for cutting printed labels with the built-in cutter.
Accessing printer status, firmware, and environment details.
Adjusting print alignment for vertical, horizontal, and stop positions.
Performing printhead cleaning and preparing the printer for transport.
Tools for calibrating color registration and printhead alignment.
Viewing error history and saving diagnostic log files.
Procedures for replacing printer components like printheads.
Instructions for swapping out empty ink cartridges.
Guide for replacing the waste ink collection cartridge.
Steps to clean the exterior and interior of the printer.
Process for updating the printer's internal software.
Procedure to safely clear media jams from the printer.
Diagnosing and resolving issues with printer power and operation.
Common causes and solutions for low-quality print output.
Resolving issues where print output shows abstract patterns due to misaligned printheads.
Addressing print defects caused by blocked nozzles.
Instructions for physically attaching the rewinder accessory.
Process for setting up and using the rewinder to collect printed labels.
Fine-tuning the rewinder's position for proper label collection.
Guidelines for choosing a safe and suitable environment for the printer.
Important safety information regarding the printer's power connection.
Essential safety practices for operating and maintaining the printer.
Technical details and performance characteristics of the Kiaro! 200 printer.
