QuickLabel Kiaro! 200 User Manual

Troubleshooting
Kiaro! 200 User Guide 117
Media Being Pulled at Label Exit
Description
Overlapping label content/shifting label content.
Cause
As the ink is being sprayed in the printer, the media moves faster or slower than
intended and a print defect results.
Possible Solutions
If a rewinder is in use, ensure the rewinder is aligned with the exiting media.
Ensure the label exit is uninhibited.
Lower rewinder torque.

QuickLabel Kiaro! 200 Specifications

General

Brand	QuickLabel
Model	Kiaro! 200
Category	Label Maker
Language	English