QuickLabel Kiaro! 200 User Manual

Kiaro! 200 Maintenance Utility
60 Kiaro! 200 User Guide
4 Enter a horizontal baseline value.
In the following illustration, a label is exiting the printer. Note the positive and
negative adjustment directions.
5 To save the horizontal baseline value, choose Save to Printer.
Setting the Stop Position
The Stop Position setting adjusts the position at which the media is fed after printing.
You can adjust the position -10 to +10 mm.
1 Launch the Kiaro! 200 Maintenance Utility.
From the Windows Start Menu, choose Start > All Programs > QuickLabel
Kiaro! 200 > Kiaro! 200 Maintenance Utility. A language and printer prompt will
open.
Select a display language and the Kiaro! 200 printer you want to connect to.
Choose OK.
2 Choose the Position tab.
3 To read the stop position value from the printer and set the Stop Position control
accordingly, choose Read From Printer.
4 Enter a stop position value.
• Positive values result in more media being fed after printing before the media
stops.
• Negative values result in less media being fed after printing before the media
stops.
5 To save the stop position value, choose Save to Printer.

QuickLabel Kiaro! 200 Specifications

General

Brand	QuickLabel
Model	Kiaro! 200
Category	Label Maker
Language	English