QuickLabel Kiaro! 200 User Manual

Kiaro! 200 Maintenance Utility
56 Kiaro! 200 User Guide
Viewing Printer Information
1 Launch the Kiaro! 200 Maintenance Utility.
From the Windows Start Menu, choose Start > All Programs > QuickLabel
Kiaro! 200 > Kiaro! 200 Maintenance Utility. A language and printer prompt will
open.
Select a display language and the Kiaro! 200 printer you want to connect to.
Choose OK.
2 Choose the Printer Information tab.
3 View the printer information.
• Printer - This section provides the serial number of the printer and the installed
firmware version number.
• Parts Counter - This section provides the percentage of service life used by
the blade cleaner and purge unit. When an item reaches 100% of service life
used, it must be replaced.
This section also provides the amount of media that has been transported
through the system.
• Environment - This section provides the current temperature and humidity of
the printer location.
• Print Heads - This section provides the percentage of service life used by the
printheads. If print quality is acceptable, you can continue to use a printhead
past 100% of its service life.
This section also provides the serial numbers and installation dates for
printheads.
Related Topics:
- Parts Replacement Tab on page 85
Upgrading the Printer Firmware
1 Ensure a Kiaro! 200 Firmware file (*.udf) is accessible from your PC.
2 Launch the Kiaro! 200 Maintenance Utility.
From the Windows Start Menu, choose Start > All Programs > QuickLabel
Kiaro! 200 > Kiaro! 200 Maintenance Utility. A language and printer prompt will
open.
Select a display language and the Kiaro! 200 printer you want to connect to.
Choose OK.
3 Choose the Printer Information tab.

QuickLabel Kiaro! 200 Specifications

General

Brand	QuickLabel
Model	Kiaro! 200
Category	Label Maker
Language	English