Designing and Printing Labels
40 Kiaro! 200 User Guide
Setting up Layout Options
Before you print using a third-party application, you will need to select layout options to
define how your label will be printed.
Note: Driver instructions apply only to printing via third party design applications. If you
are using Custom QuickLabel Omni, this process is not required.
1 Open the appropriate printer window based on your version of Windows.
• In Windows XP, choose Start > Printers and Faxes.
• In Windows Vista, choose Start > Control Panel > Printers.
• In Windows 7, choose Start > Devices and Printers.
• In Windows 8, access the Search option by pointing to the upper-right corner
of the screen. Search for "Control Panel" and click the Control Panel icon. In
the Control Panel window, click View Devices and Printers.
Right-click the printer icon and choose Printing Preferences. The QuickLabel
Kiaro! 200 Printing Preferences window will open.
Note: You can also access the driver preferences via the application’s print dialog.
From the Print window in your software, select QuickLabel Kiaro! 200 from the
printer list and choose Properties or Setup (varies based on program).
2 Choose the Layout tab.
3 If necessary, you can select a printing orientation. Orientation is often set within the
design application. However, if you cannot select an orientation in the design
application, choose from the following options:
• Portrait - Select this option if you want to print the label in a portrait orientation
on the label roll.
To Next Page
Loading...
Need help?
General
