Introduction
Kiaro! 200 User Guide 25
Switching the Printer On and Off
Switching the Printer On
Make sure that the power cable is connected properly, and then turn on the printer.
1 Turn on the power switch.
Cleaning is performed and the printer becomes ready for printing. When the printer
is in the Online mode, the STATUS LED stays lit.
Note: When the printer is in sleep mode, press the power key to return the printer
to online mode. The printer will also wake up from the sleep mode automatically as
soon as it starts receiving a print job.
8 ERROR LED
• On - Operator-call error (can be recovered by user operation).
• Blinking - Fatal error.
• Off - Normal.
9STATUS LED
• On - Online mode.
• Blinking - Data being received (printing, cleaning, initializing,
shut-down).
• Off - Offline mode (during cleaning, etc.).
# Part Description
To Next Page
Loading...
Need help?
General
