Kiaro! 200 User Guide 89
5
Printer Maintenance
Replacing Ink Tanks
When the remaining ink level becomes low, a low ink message will be displayed on the
Status Monitor to notify you that the corresponding ink tank will soon be out of ink.
When an ink tank is out of ink, an out of ink message will be displayed and printing will
stop.
The printer has four ink tanks: black (Bk), cyan (C), magenta (M), and yellow (Y).
Confirm the message displayed on the Status Monitor and replace the appropriate ink
tank.
Warning: For safety, keep ink tanks out of the reach of children. If ink is accidentally
ingested, contact a physician immediately.
• To maintain printhead quality, the printer stops operating before it is completely out
of ink. Therefore, a small amount of ink remains in the ink tank to be replaced.
• To get good printing results, use up each ink tank within six months of opening the
package.
• Do not remove an ink tank unless you must replace it. This could shorten the life
of the consumables. Ink tanks are only guaranteed for five re-punctures.
• Complete the ink tank replacement procedure as quickly as possible. Do not leave
the printer with ink tanks removed.
• An ink tank left in a high-temperature place can deform. However, there is nothing
wrong with its functions. It is recommended that ink tanks be stored where
temperature does not rise extremely.
• Be careful not to stain your clothes or the surrounding area by the used ink tank.
1 Open the ink tank door.
To Next Page
Loading...
Need help?
General
