Introduction
26 Kiaro! 200 User Guide
Switching the Printer Off
1 Press the power key for at least one second.
The Power LED will blink at long intervals, and then the printer will enter sleep
mode.
2 Turn off the power switch. If the printer is already in sleep mode, just turn off the
power switch.
Note: Never turn off the main power switch during a print job. This could cause
damage because the printhead cannot return to the home position.
When the printer is not used for a long period of time:
• To prevent media from discoloring, remove it from the media supply. Store the
removed media in a plastic bag or box such that it is not exposed to high
temperature, high humidity, and direct sunlight.
• If the printer is to remain operational, it should be powered on to prime/clean
the printheads every 8 weeks. If the printer is to be stored, it should be powered
on to prime/clean the printheads every 2 weeks.
To Next Page
Loading...
Need help?
General
