QuickLabel Kiaro! 200 User Manual

Kiaro! 200 Maintenance Utility
Kiaro! 200 User Guide 59
4 Enter a vertical baseline value.
In the following illustration, a label is exiting the printer. Note the positive and
negative adjustment directions.
5 To save the vertical baseline value, choose Save to Printer.
Setting the Horizontal Baseline
The horizontal baseline setting adjusts the horizontal position of the printed image. You
can adjust the baseline -93 to +200 dots.
1 Launch the Kiaro! 200 Maintenance Utility.
From the Windows Start Menu, choose Start > All Programs > QuickLabel
Kiaro! 200 > Kiaro! 200 Maintenance Utility. A language and printer prompt will
open.
Select a display language and the Kiaro! 200 printer you want to connect to.
Choose OK.
2 Choose the Position tab.
3 To read the horizontal baseline value from the printer and set the Horizontal
Baseline control accordingly, choose Read From Printer.

QuickLabel Kiaro! 200 Specifications

General

Brand	QuickLabel
Model	Kiaro! 200
Category	Label Maker
Language	English