Troubleshooting
Kiaro! 200 User Guide 103
Print Results are Unsatisfactory
Random Characters are Printed
Slow to Print
Print Quality is Poor
Check Point Solution
An interface cable is disconnected. Check the interface cable and make
sure that it is connected to the printer
and the computer.
The printer driver is not selected on the
computer.
Make sure that the Kiaro! 200 printer is
selected when you start the print job.
Check Point Solution
Print speed is set to a lower speed. Set the print speed in the Layout tab of
the printer driver or in Custom QuickLa-
bel Omni. Auto print speed is recom-
mended.
Check Point Solution
Streaks appear on the printout. Open the Cleaning tab of the Mainte-
nance Utility and perform cleaning.
If the problem persists after performing
cleaning, contact QuickLabel Support.
White spots due to missing colors. Open the Cleaning tab of the Mainte-
nance Utility and perform cleaning.
If the problem persists after performing
cleaning, contact QuickLabel Support.
Printout is faint. Open the Cleaning tab of the Mainte-
nance Utility and perform cleaning.
If the problem persists after performing
cleaning, contact QuickLabel Support.
Misalignment of colors appears. Open the Adjustment tab of the Mainte-
nance Utility and perform registration.
To Next Page
Loading...
Need help?
General
