QuickLabel Kiaro! 200 User Manual

Kiaro! 200 Maintenance Utility
Kiaro! 200 User Guide 61
Cleaning Tab
Use the Cleaning tab to clean the printheads, prepare the printer for transport, and
prime the printheads. If you are using the Kiaro! 200D printer, use this tab to refresh ink.
Cleaning Printheads
If you suspect print quality issues related to banding, clogged nozzles, or printing
defects, you might want to initiate a cleaning.
Printhead cleaning cannot be done during a print job or if an error is occurring. When
cleaning is in progress, do not perform any other operation.
Note: Cleaning the printhead consumes ink. Clean the printhead only when
necessary.
The cleaning options discussed in this procedure are also available in the Status tab
of the Kiaro! 200 printer driver and the Cleaning menu of the Kiaro! 200 Status Monitor.
1 Launch the Kiaro! 200 Maintenance Utility.
From the Windows Start Menu, choose Start > All Programs > QuickLabel
Kiaro! 200 > Kiaro! 200 Maintenance Utility. A language and printer prompt will
open.
Select a display language and the Kiaro! 200 printer you want to connect to.
Choose OK.
2 Choose the Cleaning tab.

QuickLabel Kiaro! 200 Specifications

General

Brand	QuickLabel
Model	Kiaro! 200
Category	Label Maker
Language	English