To Next PageTo Next PageHow to fix white spots due to missing colors in QuickLabel Label Maker?
To resolve white spots due to missing colors on your QuickLabel Label Maker, open the Cleaning tab of the Maintenance Utility and perform cleaning. If the problem persists after performing cleaning, contact QuickLabel Support.
What to do if media moves faster or slower than intended during printing with QuickLabel Kiaro! 200?
To address the issue of media moving faster or slower than intended during printing with your QuickLabel Label Maker, ensure the rewinder is aligned with the exiting media if one is in use. Make sure the label exit is uninhibited and lower the rewinder torque.
How to fix streaks on printout with QuickLabel Kiaro! 200?
If your QuickLabel Label Maker is experiencing streaks on the printout, open the Cleaning tab of the Maintenance Utility and perform cleaning. If the problem persists after performing cleaning, contact QuickLabel Support.
General| Print Technology | Inkjet |
|---|---|
| Connectivity | USB, Ethernet |
| Cutter | Automatic |
| Max Print Speed | 152 mm/s |
| Resolution | 1200 dpi |
| Media Types | Tags |
| Operating System Compatibility | Windows, Mac |
| Supported Label Materials | Paper, polyester, polypropylene |
| Weight | 10 kg |
Specifies environmental factors and requirements for printer placement.
Lists critical steps to follow during printer installation to prevent damage.
Outlines the necessary hardware and software for the printer.
Step-by-step guide for safely removing the printer from packaging.
Instructions for installing the ink cartridges into the printer.
Procedure to fill the printer's ink system for the first time.
Guide on how to correctly load label rolls into the printer.
Steps to install the printer software via a USB connection.
Steps to install the printer software via a network connection.
Overview of the Kiaro! 200's features and benefits.
Identifies and describes the main components of the printer.
Explains the controls and indicators on the printer's operation panel.
Instructions for powering the printer on and safely turning it off.
Guide to selecting appropriate software for label creation.
Configuration of printer driver settings for label printing.
Adjusting visual settings like print quality and color for labels.
Process for sending label jobs to the printer and monitoring them.
Instructions for cutting printed labels with the built-in cutter.
Accessing printer status, firmware, and environment details.
Adjusting print alignment for vertical, horizontal, and stop positions.
Performing printhead cleaning and preparing the printer for transport.
Tools for calibrating color registration and printhead alignment.
Viewing error history and saving diagnostic log files.
Procedures for replacing printer components like printheads.
Instructions for swapping out empty ink cartridges.
Guide for replacing the waste ink collection cartridge.
Steps to clean the exterior and interior of the printer.
Process for updating the printer's internal software.
Procedure to safely clear media jams from the printer.
Diagnosing and resolving issues with printer power and operation.
Common causes and solutions for low-quality print output.
Resolving issues where print output shows abstract patterns due to misaligned printheads.
Addressing print defects caused by blocked nozzles.
Instructions for physically attaching the rewinder accessory.
Process for setting up and using the rewinder to collect printed labels.
Fine-tuning the rewinder's position for proper label collection.
Guidelines for choosing a safe and suitable environment for the printer.
Important safety information regarding the printer's power connection.
Essential safety practices for operating and maintaining the printer.
Technical details and performance characteristics of the Kiaro! 200 printer.
