To Next PageTo Next PageWhat to do if a nozzle in QuickLabel Kiaro! 200 printhead is clogged?
To address a clogged nozzle in the printhead of your QuickLabel Label Maker, run a printhead cleaning routine from the maintenance utility. If that doesn't work, run a printhead priming routine from the maintenance utility to drain and refill the printheads with ink. If the problem persists, please contact Technical Support.
How to fix a nozzle that is no longer functioning in QuickLabel Kiaro! 200 Label Maker printhead?
To attempt to fix a single non-functioning nozzle on your QuickLabel Label Maker, run a printhead cleaning routine from the maintenance utility. Also, run a missing nozzle adjustment routine in the maintenance utility and adjust based on which number has broken lines around it to compensate by firing the adjacent nozzles more.
How to fix inherent flaws visible after printing solid colors on QuickLabel Kiaro! 200?
To address inherent flaws becoming visible after printing solid color fills with your QuickLabel Label Maker, try using a rewinder with a dancer-arm. This helps ensure the media is as flat and moves as smoothly as possible.
What to do if using unapproved media type or wrong media profile with QuickLabel Kiaro! 200?
With your QuickLabel Label Maker, try using approved media or the correct media profile to resolve the problem.
How to prevent contaminants on labels affecting ink absorption with QuickLabel Label Maker?
To resolve the issue of contaminants affecting ink absorption on your QuickLabel Label Maker, handle the media with care.
What to do if media is physically coming into contact with surfaces before ink is dried in QuickLabel Kiaro! 200?
To resolve the issue of media physically contacting surfaces before the ink is dried in your QuickLabel Label Maker, handle media with care post-printing. Ensure the media is loaded correctly and is flat while passing through the transport assembly.
What causes label roll to get pulled during printing with QuickLabel Label Maker?
To address the issue of too much torque causing the label roll to get pulled during printing with your QuickLabel Label Maker, lower the rewinder torque and ensure the rewinder is properly aligned to the media.
Why are wrong colors printed on QuickLabel Kiaro! 200?
If you're getting wrong colors, or the image is too bright, dark, faint or pale with your QuickLabel Label Maker, check the image in your design application. If necessary, make adjustments in the Advanced Color Settings window.
How to fix misalignment of colors on QuickLabel Kiaro! 200 Label Maker?
If you're experiencing misalignment of colors with your QuickLabel Label Maker, open the Adjustment tab of the Maintenance Utility and perform registration.
What to do if printout is faint on QuickLabel Label Maker?
To fix faint printouts on your QuickLabel Label Maker, open the Cleaning tab of the Maintenance Utility and perform cleaning. If the problem persists after performing cleaning, contact QuickLabel Support.
General| Print Technology | Inkjet |
|---|---|
| Connectivity | USB, Ethernet |
| Cutter | Automatic |
| Max Print Speed | 152 mm/s |
| Resolution | 1200 dpi |
| Media Types | Tags |
| Operating System Compatibility | Windows, Mac |
| Supported Label Materials | Paper, polyester, polypropylene |
| Weight | 10 kg |
Specifies environmental factors and requirements for printer placement.
Lists critical steps to follow during printer installation to prevent damage.
Outlines the necessary hardware and software for the printer.
Step-by-step guide for safely removing the printer from packaging.
Instructions for installing the ink cartridges into the printer.
Procedure to fill the printer's ink system for the first time.
Guide on how to correctly load label rolls into the printer.
Steps to install the printer software via a USB connection.
Steps to install the printer software via a network connection.
Overview of the Kiaro! 200's features and benefits.
Identifies and describes the main components of the printer.
Explains the controls and indicators on the printer's operation panel.
Instructions for powering the printer on and safely turning it off.
Guide to selecting appropriate software for label creation.
Configuration of printer driver settings for label printing.
Adjusting visual settings like print quality and color for labels.
Process for sending label jobs to the printer and monitoring them.
Instructions for cutting printed labels with the built-in cutter.
Accessing printer status, firmware, and environment details.
Adjusting print alignment for vertical, horizontal, and stop positions.
Performing printhead cleaning and preparing the printer for transport.
Tools for calibrating color registration and printhead alignment.
Viewing error history and saving diagnostic log files.
Procedures for replacing printer components like printheads.
Instructions for swapping out empty ink cartridges.
Guide for replacing the waste ink collection cartridge.
Steps to clean the exterior and interior of the printer.
Process for updating the printer's internal software.
Procedure to safely clear media jams from the printer.
Diagnosing and resolving issues with printer power and operation.
Common causes and solutions for low-quality print output.
Resolving issues where print output shows abstract patterns due to misaligned printheads.
Addressing print defects caused by blocked nozzles.
Instructions for physically attaching the rewinder accessory.
Process for setting up and using the rewinder to collect printed labels.
Fine-tuning the rewinder's position for proper label collection.
Guidelines for choosing a safe and suitable environment for the printer.
Important safety information regarding the printer's power connection.
Essential safety practices for operating and maintaining the printer.
Technical details and performance characteristics of the Kiaro! 200 printer.
