Designing and Printing Labels
40 Kiaro! 50 User Guide
Note: You can also access the driver preferences via the application’s print dialog.
From the Print window in your software, select QuickLabel Kiaro! 50 from the
printer list and choose Properties or Setup (varies based on program).
2 Choose the Appearance tab.
3 Check Enable Advanced Settings to enable the settings defined in this
procedure.
4 Choose Advanced Settings. The Advanced Color Settings window will open.
Choose the General tab.
5 Set the general options.
• Gamma Correction - Select the amount of gamma correction that will be
applied (1.4, 1.8, or 2.2). This option affects the darker regions of the image. A
lower value lightens dark regions while a higher value makes them darker.
To Next Page
Loading...
Need help?
General
