Qvis TERMINATOR G620 User Manual

© Copyright Qvis Labs. All soware and documentation rights reserved.
Manual updated February 2016
50
Network (connued)
Sengs
Congure Alarm Receiving Center (ARC)
PLEASE NOTE: you are only able to connect to the ARC on the 2U
Genisys & Terminator G620 model NVRs.
If you have a registered account
with Qvis Monitoring Ltd you will
be instructed on what informaon
needs to be included within this
conguraon (‘Enty ID’ is the Cortex
NVR unit’s IP address)
To connect your CCTV system to our
Alarm Receiving and CCTV monitoring
Centre please contact us on:
TEL:
02393 870057
Email: sales@qvismonitoring.co.uk
“ThemostaccreditedARCintheUK”

Qvis TERMINATOR G620 Specifications

General

Brand	Qvis
Model	TERMINATOR G620
Category	DVR
Language	English