Qvis TERMINATOR G620 User Manual

© Copyright Qvis Labs. All soware and documentation rights reserved.
Manual updated February 2016
54
Alarm
Sengs
Note: Schedule and Alarms features are only available on the 2U Universal model of NVR.
This menu allows you to setup alarm triggers using the moon sensor funcons of the Qvis
operang system. When an alarm is triggered on one of the cameras that has been setup
to detect an alarm trigger, the camera’s live video panel within the live monitor screen
will enlarge to full screen to nofy user of the alarm event. The NVR allows the user to set
up to six dierent methods to be alerted of the alarm event.
Sensor Events:
Clicking on this menu secon buon will allow you setup what acons the Alarm funcon
will perform.
Sensor Number: You can select up to 16 or 32 (only available on 2U Genisys
model) dierent Sensor sengs. This opon will save the sengs you
have selected so you can quickly change how you want the alarm
to operate.
Schedule: This will bring up the schedule editor so you can select the mes
during the week in which the alarm funcon is operaonal.
Temporarily
Deacvate: Tick this box if you want to deacvate the schedule.
(Connuednextpage)

Qvis TERMINATOR G620 Specifications

General

Brand	Qvis
Model	TERMINATOR G620
Category	DVR
Language	English