30
Another new feature to the current NVR is that you can digitally zoom and focus on specic
areas of the footage with either stac IP cameras using the EPTZ (Electronic Pan Tilt Zoom).
This is an exceponally useful funcon when using the High Denion footage quality
of stac IP cameras, due to the amount you can digitally zoom into the image before it
becomes too pixelated.
EPTZ is also available in full screen mode. Double click any camera during playback to go full
screen. Double click again to revert.
EPTZ CONTROL
EPTZ CONTROL PANEL
The EPTZ control bar will
appear at the boom of the
screen. You can easily Zoom
in and Out and move in any
direcon.
You can use the arrow
buons to move about once
you have zoomed in to the
video image.
Click the ‘Done’ buon, far
right, to exit EPTZ.
You can also use the EPTZ
funcon on playback, to zoom in and
out and move in any direcon on a
selected camera channel.
Simply right click on selected live camera
channel and select ‘EPTZ’
The below area has been zoomed in using the EPTZ funcon
To Next Page
Loading...
Need help?
General
