Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 105 of 252
4. Press the [Back]-key to exit the FM radio mode and return to the previous level
or press the [OK]-key to choose from the following options and procedures:
(1) Save → press the [Select]-key to save the current FM radio channel.
(2) FMList → press the [Select]-key to display the list of saved FM radio
frequencies → rotate the [ENC] knob or use the [▲/▼]-keys to choose the
desired frequency → press the [Select]-key to select one of the following
options:
• Delete → press the [Select]-key to delete the current FM radio frequency
or press the [Back]-key to cancel.
• Play → press the [Select]-key to play the current FM radio frequency or
press the [Back]-key to cancel.
(3) TuneMode → press the [OK]-key to choose from the following options and
procedures:
• Manual → press the [Select]-key to select the manual tuning mode →
‘Mode is set’ pops up on the screen and returns to the previous level.
• Auto → press the [Select]-key to select the automatic tuning mode →
‘Mode is set’ pops up on the screen and returns to the previous level.
10.9.3 Time
1. Access the menu, press the [Menu]-key and rotate the [ENC] knob or use the
[▲/▼]-keys to choose Appendix and then press the [Select]-key to enter.
2. Rotate the [ENC] knob or use the [▲/▼]-keys to choose Time and press the
[Select]-key to choose from the following options and procedures:
(1) Date → press the [Select]-key to display the date and year → rotate the [ENC]
knob or use the [▲/▼]-keys to change the cursor position (between year,
month and day) or input the desired date and year using the numeric
keypad of the Speaker-Microphone → press the [OK]-key to confirm → ‘Date
is set’ pops up on the screen and returns to the previous level.
(2) Time → press the [Select]-key to display the time → rotate the [ENC] knob
or use the [▲/▼]-keys to change the cursor position (minutes and hours) or
input the desired time using the numeric keypad of the Speaker-Microphone
→ press the [OK]-key to confirm → ‘Time is set’ pops up on the screen and
returns to the previous level.
(3) DateForm → press the [Select]-key → rotate the [ENC] knob or use the
[▲/▼]-keys to choose the desired date form (Y/M/D, M/D/Y or D/M/Y)→
press the [Select]-key to confirm → ‘Date is set’ pops up on the screen and
returns to the previous level.
To Next Page
Loading...
Need help?
General
