Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0
© Radioddity 2023 page 85 of 252
(2) Channel Add → press the [Select]-key → select zone → select channel to be
added → press (OK) to confirm your selection → return to previous level.
Zone list → rotate the [ENC] knob or use the [▲/▼]-keys to choose the Zone
→ press the [Select]-key → rotate the [ENC] knob or use the [▲/▼]-keys to
choose the desired channel → press the [Select]-key to add the selected
channel and return to the scan list.
10.4.3 Scan Mode
1. Press the preset [Scan Mode]-key to choose the scan mode.
or
1. Access the menu, press the [Menu]-key and rotate the [ENC] knob or use the
[▲/▼]-keys in order to select Scan and press the [Select]-key to enter.
2. Rotate the [ENC] knob or use the [▲/▼]-keys to Scan Mode and press the
[Select]-key to enter.
(1) Carrier - when the radio receives a HF carrier signal while scanning, it will
stay at the current channel for a short time until the carrier signal disappears
and continue to scanning.
(2) Time - when the radio receives a HF carrier signal while scanning, it will stay
at the current channel for a preset short period (time range is 5…20 sec) and
continue with scanning once the preset period is up.
(3) Search - when the radio receives a HF carrier signal while scanning, it will
stay at the current channel and exit the scanning, unless you restart it.
Notes: Before any scan mode is selected, please make sure the ‘Scan List’ is preset in
advance, otherwise the scan feature is unable to be activated. When the scan
is On, the radio will start to scan all the receivable channels in the list.
10.4.4 Roam Setting
Roaming and Roam Mode can be enabled or disabled by the following two ways:
1. Press the preset [Roam On/Off]-key to turn the roaming On/Off.
or
1. Access the menu, press the [Menu]-key and rotate the [ENC] knob or use the
[▲/▼]-keys in order to select Scan and press the [Select]-key to enter.
2. Rotate the [ENC] knob or use the [▲/▼]-keys to Roam Setting and press the
[Select]-key to choose from one of the following options:
To Next Page
Loading...
