Radioddity GD-88

To Next Page

To Previous Page

Radioddity Extended manual for Radioddity DB25-D, DB40-D & GD-88 v3.0

• AddCommMsg → press the [Select]-key → input the message using the

numeric keypad of the Speaker-Microphone → press the [OK]-key → choose

either Save or ExitEditor → press the [Select]-key → return to the previous

level.

• Edit → press the [Select]-key → edit the message using the numeric keypad

of the Speaker-Microphone → press the [OK]-key → choose either Save or

ExitEditor → press the [Select]-key → return to the previous level.

• Delete → press the [Select]-key → ‘Are you sure?’ pops up on the screen →

press the [OK]-key to confirm deletion or press the [Back]-key to cancel the

deletion → return back to previous level.

• Send → Press the [Select]-key → edit SMS and press the [Select]-key to either

Search a contact or WriteNumber to manually key in the receiver ID using

the numerical keypad of the Speaker-Microphone → press the [OK]-key to

send the message → return to the previous level.

Notes: If there are no Common Messages, you should pre-program those using the

Radioddity CPS software first or add them into ‘CommMsg’.

10.2.4 Inbox

1. Access the menu, press the [Menu]-key and rotate the [ENC] knob or use the

[▲/▼]-keys to select Message and press the [Select]-key to enter.

2. Rotate the [ENC] knob or use the [▲/▼]-keys to lnbox, and press the [Select]-

key to choose from one of the following options:

(1) lnbox list → press the [Select]-key → rotate the [ENC] knob or use the [▲/▼]-

keys to choose the received message → press the [Select]-key to display the

full message → press the [Select]-key to perform one of the following

options:

• Reply → press the [Select]-key → edit SMS → rotate the [ENC] knob or

use the [▲/▼]-keys to choose an option of either SendMsg,

lnsertComMsg or ExitEditor → press the [Select]-key to confirm the

selected option.

• Forward → Press the [Select]-key → rotate the [ENC] knob or use the

[▲/▼]-keys to choose an option of either Search or WriteNumber →

Press the [Select]-key → rotate the [ENC] knob or use the [▲/▼]-keys to

choose the contact or input the ID number using the numeric keypad of

the Speaker-Microphone → Press the [OK]-key to send the SMS.

• Edit → press the [Select]-key to make changes to the message → Press

the [OK]-key → rotate the [ENC] knob or use the [▲/▼]-keys to choose

Radioddity GD-88 - Inbox